• Your shopping cart is empty!

24 Port PoE Switch

  • Product Code: PS1024
  • Availability: In Stock
  • RM1,599.00

  • RM1,475.00


The PS1024 24-Port unmanaged PoE Switch with 24 100Mbit RJ45 ports, Gigabit Copper/SFP Combo uplink Port, model PS1024, reduces equipment and installation costs by delivering data and power over existing Ethernet Cables (CAT5 cable) to Power over Ethernet (PoE) enabled devices such as Access Points and IP Cameras. Boost office efficiency and reduce network congestion with a total switching capacity of 8.8Gbps. LED indicators display device status for easy power management and troubleshooting. An internal power supply reduces clutter and delivers 15.4 Watts to each PoE port. A convenient on/off button is located on the back of the switch. Non-PoE devices can connect to the switch- auto-sending PoE technology cuts power to non-PoE connected devices. Use PoE splitter with the PS1024 to install non-PoE devices in remote locations.

Key features

  • 24-Port 10/100Mbps + 2 Gigabit Copper/ SFP Combo uplink Port unmanaged PoE Switch
  • 24-Port supply power to PoE Powered Device
  • Complies with the IEEE 802.3f standard
  • If 12 PoE port work only, then complies with IEEE 802.3 at standard, 25W each port
  • Each switch port support auto-negotiation-10/20, 100/200Mbps (Fast Ethernet), 1000/2000 Mbps (Gigabit Ethernet).
  • Support MAC address auto-learning and auto-aging
  • Prevents packet loss with back pressure (Half-duplex) and IEEE 802.3 x PAUSE frame flow control (Full-duplex)
  • High Performance Store and Forward architecture, broadcast storm control, runt/ CRC filtering eliminates erroneous packets to optimize the network bandwidth
  • Non-blocking switching architecture that forwards and filters packets at full wire-speed for maximum throughput
  • 8.8Gbps Switching Capacity
  • On/Off power switch

Specifications

Product Name24-ports unmanaged POE Switch
Model No.PS1024
Network protocols and standards
  • IEEE 802.3 10BASE-T
  • IEEE 802.3u 100BASE-TX
  • IEEE 802.3ab 1000BASE-T
  • IEEE 802.3z 1000BASE-X
  • IEEE 802.3x Flow Control
  • IEEE 802.3af Power over Ethernet
Power Specifications
  • Power consumption: maximum 390W
  • PoE Power: 360W
  • Voltage: 100-240 VAC, 50-60Hz
Network interface
  • 24 10/100M ports (MDI/ MDIX adaptive); ports with PoE features (24)
  • 2 10/100/1000M Gigabit copper RJ45 ports (MDI/ MDIX adaptive)
  • 2 SFP GBIC fiber module slots
Physical Specifications
  • Dimensions: 440 x 350 x 44mm
  • Weight: 5.5Kg
Electromagnetic radiation
  • CE mark,commercial
  • FCC Part 15 Class A
  • VCCI Class A
  • C-Tick
Environmental norms
  • Operating Temperature: 0°- 50°C (32° - 104°F)
  • Storage Temperature:-20° - 70° C (-4° - 158°F)
  • Operating Humidity: Maximum relative humidity 90% without condensation
  • Storage humidity: 95% maximum relative humidity, non-condensing
  • Working height: up to 10,000 feet (3,000 meters)
  • Storage altitude: the largest 10,000 feet (3,000 meters)
LEDs
  • Each device: power light
  • Per port (10/100 and gigabit): connection speed indicator
  • Per PoE port: PoE power-on LED
Radiation /electromagnetic immunityEN 55024
CertificationCE, FCC, RoHS
Performance Specifications
  • Forwarding modes: Store and forward
  • Bandwidth:8.8 Gbps (non-blocking)
  • Network latency: 100 Mbps to 100 Mbps transmission, storage and forwarding mode under a 64-byte frame delay is less than 20 microseconds
  • Buffer memory: 3 Mb per system
  • Addressing: 48-bit MAC address
  • The address database size: 8,000 per system MAC address
  • Mean failure interval (MTBF) 300,000 hours (about 34 years)


Warranty Period : 1 Year
** All power cord and adapter comes with 1 Month warranty from installation date.
** Warranty does not cover wear and tear, damages arisen from misuse or use not in accordance with product instructions.